Description:
It is solvent-free, highbond strength, good environmental performance one component PU glue; it is usefor spray coat and sandwich tracks primer and mix with SBR or EPDM.
Features:
High bond strength, elastic medium, easy installation andmaintenance, good environmental performance
Test Data
Item | Data |
Color | Light yellow color liquid |
Viscosity(25℃,Mpa•s) | 4000~10000 |
Solidity(%) | ≥ 99 |
Pot life(25℃,mins) | ≥ 60 |
Curing time(25℃,h) | ≤ 24 |
Tensile strength(MPa) | ≥0.9 |
Elongation at break(%) | ≥ 70 |
Application
Spray coat, Sandwich tracks,EPDM Floor.
Packing and Storage
Iron Packing: 200kg/drum or 20kg/drum
Store in a cool, ventilated,dry warehouse, away from fire, heat, Strict water, moisture, protected fromsunlight
The service life is 12months.after6months, it need test first before install.
Installation
As bottom layer, it mixes with rubber granules,the mixture is 1: 8, ensure the granules are dry and no powder
The drying time is about 10hours.
As top coat, it mixes with EPDM granules, themixture is 1: 5.
It suggest to install the ground temperaturebetween 5--35℃
Note:
The uncured mixture should not longtime touch skin
Such as accidentally into the eyes, rinse with plenty of water, seekimmediate medical attention.
It belongs to chemical products, prohibit the consumption of prohibitedimplanted in the body, avoid the reach of children.